Best Workstation Kitchen Sinks in the Market

If you’re looking for the best marginal value in kitchen sinks, Workstation Kitchen is the best choice you can make. But it’s hard to get a good deal on one. And that’s exactly what we’re going to do.

In order to get the best workstation kitchen sink, you need to evaluate every potential workstation sink and analyze its quality and cost.

Sounds exhausting…?

Just read the comments below. They are the top 5 workstation kitchen sinks based on our research. We also have a buying guide on how to continue your own research.

Comparison Table

We’ve given our full review of workstation kitchen sinks. To get some basic comparisons, we’ve also included a comparison table of these five sinks –

Now let’s move on to the details-

1. Ruvati Undermount Workstation Kitchen Sink- RVH8222

Advantages

• Best material
• Two-layer adhesive system
• Available with double bowl
• Best sound insulation
• Lifetime limited warranty
• Includes all necessary accessories
• Good customer response

Disadvantages

• Incorrect installation instructions

For those who prefer undercounter kitchen sinks, this is one of the best sinks on the market. This sink comes in three variations –

• 33 inches
• 45 inches
• 57 inches
• 33×22 inch double bowl

That’s right, you have a double bowl workstation sink here.

Made of T-304 grade stainless steel, 18/10 chrome and nickel density range, this sink is 37% thicker than a regular sink. On top of that, there is a thick rubber gasket and acoustic cover to reduce noise.

The bottom has a recessed slope that goes down one inch from the highest point. Another highlight is the two-layer track that gives you one that sticks under 0.25 inches and another that goes under 2 inches at the top edge.

Accessories are –

• Cutting board (reversible)
• Mixing bowl with wooden platform
• Grinder and pasta strainer attachment
• Basket strainer
• Deep strainer
• Bottom rinsing grid
• Stylish drain cover

For installation, you will have –

• Cutout template
• Mounting brackets

As with all Ruvati products, this international kitchen sink brand is backed by a limited lifetime warranty within the United States.

2. Sarlai Topmount Deep Bowl Sinks

Advantages

• Reasonable price
• R10 radius corners
• High-quality materials
• Three-month return policy and money-back guarantee
• Includes all necessary accessories

Disadvantages

• The quality of the cutting board is not the best
• Mounting the clips is a pain

Workstation kitchens are mostly overpriced. But Sarlai brings you a low-cost workstation kitchen sink. Nevertheless, this budget workstation kitchen ink has almost all the premium features.

Like those premium sinks, it has a 16 gauge thick T-304 stainless steel construction. On top of it, the sink has a 3mm thick sound-absorbing pad. It minimizes sound by absorbing vibrations. And its finish also resists condensation.

It has ledges at the front and back. These ledges can be used as tracks for accessories. The accessories that come with the sink are

• Rolling shelves
• Sapele mahogany cutting board
• Drain spout assembly
• Stainless steel bottom flushers
• Stainless steel strainer

The R10 radius makes the sink more comfortable. The bottom is also sloped and grooved. The slope is 5 degrees. The sink is easy to clean and maintain.

There is always some doubt about the low price. That’s why Sarlai offers a three-month free return and refund policy.

3. Ruvati Drop- In Tight Radius Topmount Workstation Kitchen Sink – RVH8030

Advantages

• Complete experience
• Good materials
• Includes all necessary accessories
• Well protected
• Good design

Disadvantages

• Instructions are not well designed

This Italian brand of workstation sinks is always in high demand. You can buy three variants of this kitchen sink. They are –

• 25 inches
• 30 inches
• 33×22 inches

Heavy-duty T-304 grade metal with a thickness of 16 grams has been used to make this stainless steel. On top of that, there is the signature Ruvati commercial grade brushed finish. In addition, it has a chrome and nickel concentration range of 18/10. There is also an acoustic matting layer.

Unlike the first Ruvati, it is a single-ply rail with lips at the front and back. These 0.25″ wide lips or sills are used to move accessories. And these accessories are –

• Stainless steel colander
• Cutting board
• Folding rack
• Bottom rinsing grid
• Basket strainer
• Decorative drain cover

You can also choose to mix bowls and different cutting board styles, just like another Ruvati kitchen sink.

For installation, you will have –

• Cutout template
• Marking brackets
• Installation guide

The bottom is sloped and grooved. It also comes with a tight radius for easy cleaning and maintenance. And the drainage port is 3.5 inches.

Finally, you’ll have a limited lifetime warranty exclusive to U.S. consumers.

4. KOHLER Prolific Undermount Workstation Kitchen Sink K-5540-NA

Advantages

• Ideal for small kitchens
• Multi-level wall shelves
• Powerful
• Good quality steel
• Deep basin

Disadvantages

• Expensive
• Easily scratched

This is our most expensive sink on this list. It is an undercounter sink that offers a sleek look and great performance. There are four size variations. They are –

• 23 inches
• 29 inches
• 33 inches
• 44 inches

Kohler uses 18 gauge premium steel. This sink will also be available in a stainless steel finish. This sink has a gridded sill that gives me a lot of flexibility in deciding the height of the accessories.

As a workstation kitchen sink, it will have many accessories. With this sink, you will have –

• Chopping board
• Washing bin
• Mixer
• Grate holder

The sink is covered with a premium sound-absorbing layer that minimizes sink vibration and noise. And the 10-inch deep basin accommodates all accessories well. In addition, the slope of the bottom is even conducive to holding larger debris.

Finally, you’ll have the insurance of a lifetime limited warranty.

5. KRAUS KWU110-32 Kore Workstation Undermount Kitchen Sink

Advantages

• Great steel
• Includes all necessary accessories
• Great variety
• Good sound deadening
• Spacious basin
• Good customer service

Disadvantages

• Might be too deep for someone six feet tall

This sink is very much like a professional sink that maximizes counter space. Kraus balances it with all the great features and a price that is worth it. This sink also has a lot of variety. It looks like Kraus has put a lot into this sink.

This sink comes in nine sizes-

• 17 inches
• 23 inches
• 25 inches
• 27 inches
• 30 inches
• 32 inches
• 33 inches
• 36 inches
• 45 inches

You will find this sink in both undermount and overmount styles.

Kraus uses heavy-duty 16-gauge rust-resistant steel, grade T-304. The finish of the operation is also rust-resistant. Under this finish, there is a sound-absorbing material that helps reduce sound. There is also a protective undercoating that resists scratches and dents on the body.

Along with the sink, you’ll have these five professional kitchen sink accessories –

• Bamboo cutting board
• Dish drying rack
• Drain cover
• Strainer
• Dish grids

All but the cutting board are made of the same durable stainless steel. The slightly sloped bottom and grooves allow for efficient removal of debris, both large and small. And Krauss’ customer service has always been excellent.

Finally, the company will back you up with a limited lifetime warranty.

Workstation Kitchen Sink Buying Guide

When buying a workstation kitchen sink, there are some features that you need to look for. Here is a checklist with all the criteria.

Material

Workstation kitchen sinks are best known for their stainless steel. Look for T-304 type steel in 16 gauge (1.5 mm) material thickness. However, 18 gauge will also work. The chromium and nickel content is in the 18/10 range. These make the sink both rust and dent resistant.

Rim

This is one of the main features of workstation kitchen faucets. It can have a single, two or more sills. The more the better. The depth of the sills should be within a comfortable range. They should also stick out so that everything can slide up easily.

Accessories

After the sill, accessories are the main feature of the sink. Here’s a list of accessories that should come with a workplace sink

• Chopping board
• Mixing bowl with a wooden platform
• Grinder and pasta strainer attachment
• Basket strainer
• Deep strainer
• Bottom rinsing grid
• Stylish drain cover

The metal part should be made of the same material as the sink. However, the cutting board should be made of wood. Bamboo is also good, but wood is preferable.

For installation, you will have –

• Cutting spout template
• Mounting brackets
• Installation guide

Some brands may give you more. But there should always be basic accessories such as cutting boards, strainers, bottom compartments, and colanders. These define the kitchen sink of a workstation.

Minimize Noise And Vibration

This is a big deal for any sink manufacturer. To minimize noise, manufacturers include special kinds of sound-absorbing materials. Your sink should have this material. Some inks also include thick rubber pads. They also protect the sink from wear and tear.

Finishing

The top layer of the sink is the finish. It gives your sink the look it deserves. Commercial grade brushed finishes are popular in workstation sinks. Whichever finish you choose, make sure it looks good and has few scratches.

Sink Depth

For large sinks or farmhouse workstation kitchens, this is an important thing. If you’re six feet tall, you may have a serious problem with a deep basin.

Drainage

Improper drainage can cause a lot of trouble for everyday use. That’s why you must make sure that the sink floor has a moderate slope. However, it should not slope so much that your glasses cannot stand.

Carefully designed recesses also help. But make sure they are not too deep. Semi-grooves are even better. But they will also cost a little more. The drain is also a key part. It should have the standard 3.5-inch size. And it should also be compatible with standard garbage disposals and drain baskets.

Frequently Asked Questions

There are many questions, but it is certainly not possible to answer them all.

However, there are a few important questions that should be mentioned.

1. What is 18/10 steel?

A: It means that the steel contains 18-20% chromium and 8-10% nickel. They provide more protection against rust and shine.

2. Can I buy the parts separately?

A: You can always do so, but it will be a big hassle to complete all the measurements. It is much better to have the accessories supplied by the company.

3. Is the thickness of 18 gauge bad?

A: 18 gauge is the industry average. However, 16 gauge is the best in the market. Therefore, try to take it because it will go a long way.

4. Are plastic fittings good?

A: Don’t choose them unless you have enough budget. You have to use these for sharp things. So plastic can take a lot of damage. This is taking into account the hard plastics on the market.

5. How do soundproof coatings work?

A: Sound is produced by vibration. The sound insulation layer minimizes the amount of vibration in the sink. Therefore, you will get more noise than before. Thick padding and finishes also help. But vibration minimization is the main way they work.

Conclusion

If you don’t have a large kitchen, workstation sinks are the right choice. They may seem a bit expensive, but their marginal benefits are always better than their counterparts.

With the help of this article, you can find the best workstation kitchen sinks in the market.

So, just go ahead and buy it. You won’t regret it.